Omniseal® Spring-Energized Seals

Omniseal-103-SES-Seal
Omniseal®
103 Spring-Energized Seals

These polymer seals have a ribbon spring design and are used for static and low speed applications, providing excellent leakage control at high pressure and low temperature. This sealing solution features a polymer jacket with a special shape that retains the energizer spring inside the jacket cavity. 
 

See More

Typical applications include energy custom seals for on/off valves and subsea ball and gate valves, and space anti-blowout seals for rocket engine check valves and main fuel valves.

Download Omniseal® Spring-Energized Seals Handbook
Download Omniseal® Spring-Energized Seals Handbook
Standard Specifications
Materials

Polymer jacket
Round ribbon spring

Used in

static & low speed applications, providing excellent leakage control at high pressure and low temperature

Temperature

-250 to +300°C (-418 to +572°F)

Pressure

UHV to 100 MPa

Max speed

1 m/s

Clamping load

5 N/mm

Dimensions

Face diameter / Radial Diameter: 10 to 3000 mm / 6 to 3000 mm 
Cross-section: 1.4 to 12.7 mm 
Minimum Tolerances: +/- 20 μm

Omniseal Solutions can help you with your project

Industry

A team of expert designers

Manufacturing

Customized solutions & materials to suit your projects

Extreme Applications

Expert of precision seals

Omniseal Solutions can help you with your project

Seal Function & Motion

Dynamic-Static-Seal-Function

Static & Dynamic Applications

There are two basic types of sealing applications: static and dynamic, in which at least two hardware surfaces come in contact with one another.

 

In static applications, there is essentially no relative motion between the hardware surfaces. A typical example may be flanges that are bolted together. Omniseal Solutions™ offers mostly face seals in such applications.

 

In dynamic applications, at least one surface is in motion relative to the other. A typical example is a hydraulic cylinder with shaft and bore. Further, there are two directions of motion in dynamic applications: reciprocating or linear motion, and rotary (including oscillating) motion. We offer mostly radial seals (rod seals and piston seals) in such applications.

 

Occasionally, the application may be a combination of both static and dynamic. For these more complex cases, you can contact our team of experts

Face-Radial-Seal

Radial & Axial (Face) Sealing

Based on the hardware configuration and location of seal glands, sealing can be either radial or axial (face sealing). Radial sealing has glands that compress seals in a radial direction. Male glands are machined in the shaft, whereas female glands are machined in the bore. Radial sealing is usually, but not always, dynamic.

 

We also offer rod seals and piston seals for these applications. Axial sealing has glands that compress seals parallel to the axis of the seal. Glands are machined on the face of the hardware. Axial sealing is usually, but not always, static. Omniseal Solutions™ offers inside and outside face seals in such applications.

Omniseal® Spring-Energized Seal Installation

How to successfully install a small diameter, spring-energized seal

Industry Case Studies

Take a closer look at case studies that detail this spring-energized seal's high performance.