Filter By:
Omniseal®
Metal V-Seals
This metal face sealing solution allows higher flange lift-off, a lower bolt force requirement and is highly pressure activated.
Used in
low load requirements & limited leak tightness requirements
Temperature
Cryogenic to +1100°C (+2012°F)
Pressure
vacuum to 300 psi (20 bar)
Clamping Load
Without spring, load is between 20 and 70 N/mm
Omniseal®
Metal E-Seals
Metal face E-Seals are engineered to operate in applications that require light loading, flexibility, and high temperature capability. The seals operate primarily within the elastic limits of the material.
Used in
applications that require light loading, flexibility & high temperature capability.
Temperature
-250°C to +925°C
(-423°F to +1700°F)
Pressure
3 to 30 BAR
(43 to 435 PSI)
Clamping Load
Linear loads vary from as low as 20 N/mm to more than 500 N/mm seal circumference
Omniseal®
Metal Turbo Seals
Metal turbo seals have been engineered to be used in applications that require light loading, flexibility, and high temperature capability. They can be energized by a spring to enhance the sealing performances of the seal.
Used in
applications when cavities are wide enough & in low compression load; similar to E-Seals
Temperature
Cryogenic to +1010°C (+1859°F)
Pressure
3 to 30 BAR (43 to 435 PSI)
Omniseal®
Metal Fitting Seals
This special design seal is also known as a boss seal and is our solution for the hydraulic standard AS5202, which has the best leakage rate and an ease of installation on the fitting.
Used in
areas that need an ease of installation on the fitting
Temperature
-250°C to +1100°C
(-423°F to +2000°F)
Pressure
High vacuum to 5500 bar (79770 psi)
Omniseal®
Pump Diaphragms
With 45 years of experience with injection molding diaphragms and PTFE pump components, we have earned the trust of many top OEM for Air Operated Diaphragm (AOD) pump manufacturers. These critical parts are abrasion resistant, offer low friction and wear, and are compatible with a broad range of chemicals in operating temperatures ranging from -240°C to 280°C (-400°F to 536°F).
Used in
air operated pumps, offering abrasion resistance, low friction/wear & broad range of chemical compatibility
Temperature
from -240°C to +280°C
(-400°F to +536°F)
temperature is dependent of materials selected in the design phase of the diaphragm
Max Speed
High speed / high frequency
Omniseal®
Valve Diaphragms
Our valve diaphragms are manufactured in-house with a special tooling design in a Class 10000 clean room environment. With our expertise in the molding manufacturing process, our solutions are made with precision and mechanical integrity versus traditional hot formed processes. As a result of meticulous lot traceability and detailed testing protocol, our customers are assured that their valves diaphragm solutions will be durable and reliable.
Used in
high purity applications where you need corrosion-resistance & chemical compatibility
Temperature
from -240°C to +280°C
(-400°F to +536°F)
temperature is dependent of materials selected in the design phase of the diaphragm
Pressure
145 psi (10 bar) maximum
Max Speed
High speed / high frequency
Omniseal® Rotary Lip Seals
Rotary Shaft Seals with Polymer Lips
Omniseal® polymer rotary lip seals were introduced in the early 1970s designed to bridge the gap between conventional elastomer lip seals and mechanical face seals. Also known as rotary shaft seals and made with a metal casing, the seal can be manufactured from a variety of materials for PTFE and PTFE-blended sealing elements. They perform well in hostile environments with extreme temperatures, aggressive media, high surface speeds, high pressure or lack of lubrication.
Used in
extreme face sealing areas, e.g., cryogenic fluids & high vacuum
Temperature
-60°C to +230°C
(-75°F to +450°F)
Pressure
up to 34 bar (500 psi)
Max Speed
35 m/s, up to 100m/sec for special designs
Omniseal® Bearings
Polymer Bearings
Omniseal Solutions™ offers a complete range of polymer bearings, which are an excellent solution to reduce weight, eliminate lubrication, and minimize maintenance. Bearings are viable, cost-effective alternatives to metal or ball bearings. They provide better vibration dampening, are corrosion-free, lightweight, and self-lubricating.
Used in
applications that need cost-effective alternatives to metal or ball bearings
Temperature
-240°C to +288°C
(-400°F to +550°F)
Pressure
up to 69 bar (1000 psi)
Max Speed
2 m/s
Omniseal® Metal Face Seals
Metal Seals For Internal & External Pressure
We offer a complete range of metal face sealing solutions in today's competitive and challenging marketplace with our high flexibility and strong engineering expertise. Metal face seals are an excellent choice when you need very high temperature and pressure resistance and at the same time, require the best leakage rate.
Used in
very high temperature & pressure applications that need best leakage rate
Temperature
-250°C to +1100°C
(-423°F to +2000°F)
Pressure
vacuum to 100,000 PSI
Max Speed
Static
Clamping Load
up to 150 N/mm
Omniseal® Metal Axial Seals
Metal Seals For Radial Pressure
Patented lip seals and comma seals can handle limited motions in your systems. Metal axial seals are different from metal face seals due to the top and bottom of the seal's cross-section being squeezed. They are an excellent choice to replace low friction hydraulic seals and standard O-Rings. Axial seals in particular have higher contact load compared to rubber O-Rings and will also have higher frictional drag.
Used in
applications that need higher contact load or frictional drag
Temperature
-250°C to +1100°C
(-423°F to +2000°F)
Pressure
vacuum to 100,000 psi (6894 bar)
Max Speed
Slow speed - thermal expansion and limited rotation or translation
Omniseal® Metal Special Designs
Other Metal Sealing Solutions
Our metal special design seals are designed and manufactured to precision thanks to additional manufacturing capabilities developed for customer projects and needs. Our metal special design seals are an excellent choice to replace low friction hydraulic seals and standard O-Rings.
Used in
custom applications that need special configurations
Temperature
-250°C to +1100°C
(-423°F to +2000°F)
Pressure
vacuum to 100,000 PSI
Max Speed
Slow speed - thermal expansion and limited offset
Omniseal® Piston Rings
Polymer Rings For Piston Sealing
Our Omniseal® piston rings are an excellent choice for applications that require low friction and low wear. Our piston rings have proven good performance in medium to high pressure rotary applications. There is a worldwide engineering support to solve your most challenging and demanding applications.
Used in
applications that require low friction and low wear
Temperature
-240°C to +288°C
(-400°F to +550°F)
Pressure
1000 psi (69 bar)
Max Speed
Up to 20 m/s depending on combination with applicable pressure.
Other Omniseal® Polymer Components
Custom components made from tailor-made materials
Omniseal Solutions™ has diversified its expertise in processing polymer materials to allow for any problem to be solved. Whether the application requires the design to solve corrosion issues, chemical compatibility, lubrication-free, electrical insulation improvement, or any other issue, the design starts with choosing the right material.
Used in
when a tailor-made solution is needed for critical applications
Temperature
-268°C / +350°C
(-450°F / +662°F)
for Meldin® polyimide materials
Omniseal® O-Rings
Fluoroelastomer Seals
The Omniseal® O-Ring solution is a fluoroelastomer, proprietary material that performs beyond perfluoroelastomer materials in terms of chemical resistance and inertness yet maintains softer durometer and improved compression set. This custom component has outstanding low temperature performance: down to -57°C (-70°F) and operates up to a maximum temperature of 218°C (424°F).
Used in
Low friction hydraulic seals and stan
Temperature
-57°C to +218°C
(-70°F to +424°F)
Pressure
Depends on application conditions; high pressure designs are available. Please contact our technical experts for more information.
Max Speed
Limited dynamic movement can be allowed. Please contact our technical experts for more information.
Omniseal®
400A Spring-Energized Seals
This polymer seal has a cantilever spring design and is used in dynamic applications, providing good friction and leakage control at moderate pressures and temperatures. The sealing solution features a PTFE jacket energized by a corrosion resistant, v-shaped spring (jacket designed with a flange on the ends).
Used in
dynamic applications providing good friction & leakage control at moderate pressures & temperatures
Temperature
-250°C to +350°C (-418°F to +662°F)
Pressure
UHV to 100 MPa
Max Speed
1 m/s
Clamping Load
2 N/mm
Co-development & Customer Intimacy
Tailor-made solutions through careful and detailed collaboration with customers.
Tailor-made solutions through careful and detailed collaboration with customers.
Material Expertise & Development
A solution's performance is often reliant on the characteristics of the base material used.
A solution's performance is often reliant on the characteristics of the base material used.
Precision Processing & Manufacturing
Omniseal Solutions™ has been precision manufacturing since the 1950's.
Omniseal Solutions™ has been precision manufacturing since the 1950's.