Rulon® Fluoropolymers

Rulon® W2
Rulon®
W2 PTFE

Rulon® W2 is a black PTFE-based Carbon Filled polymer material solution developed for use in fresh-water applications. It exhibits low friction and excellent wear characteristics (one of the lowest wear rates in fresh water) as well as good thermal dissipation, preventing shaft distress. Its properties are enhanced when wet and the material does not absorb water.

It is compatible with most metal substrates and soft mating surfaces. Rulon® W2 is a good alternative to Rulon® J when superior chemical resistance is needed. However, it should not be used on very soft mating surfaces or where electrical insulation is needed.
 

See More

The material is molded and precision machined from high performance polymers as PTFE and filled PTFE composites specifically designed to administers advanced properties and performance. The formulation control wear and friction properties for specific application and environment.

Download the Rulon® Fluoropolymer Materials Comparison
Download the Rulon® W2 Material Datasheet
Standard Specifications
Materials

Black fluoropolymer
Engineered carbon filled

Service conditions

Temperature: -150°C to +200°C
Max load (dry): 7 MPa
Max Speed: 2m/s

Features

Friction coefficient: 0.15 - 0.30
Max PV (dry/lub): 0.35 MPa.m/s

Dimension

Rods and Tubes: (ϕ) 1.2m x (L) 3m
Sheets: (L,W) 610 mm x (ϕ) 80mm
Tapes: (W) 1m x (T) = [0.08;6] mm

  • Superior dry friction
  • Stick/slip elimination
  • Hardware abrasion reduction
  • Minimal moisture absorption
  • Dimensional stability in all chemicals

Discover More

In addition to the more tailor-made solutions offerings, for example the Omniseal Solutions™ piston rings, typical offerings of Rulon® W2 include pumps, mixers, compressors, appliances, fresh water submerged, ovens, compressors, pumps, thrust bearings, plating tanks, wear bands, and hydraulic presses.

Applications include pumps, mixers, compressors, appliances, insulators, linear slides, pipe support, and wear bands. This material can be used in a variety of different environments, including, steam, wet, and dry.

Omniseal Solutions can help you with your project

Industry

A team of expert designers

Design Engineering

Customized products and materials to suit your projects

Extreme Applications

Expert of critical seals

Omniseal Solutions can help you with your project