Alloy Inconel X-750, Alloy Inconel 718
internal, external, and axial pressures under extreme conditions that preclude the use of gaskets made of organic materials
-253°C to +1100°C (-423°F to +2000°F)
high vacuum to 5,500 bar (79,770 psi)
e-2 to e-10 mbar*l/s (depending on the post treatment)
Approximately 250 N/mm seal circumference
Diameter: 6 mm to 3000 mm (custom upon request)
Cross-section: 00.79 to 12.70 mm
Minimum Tolerances: -/+0.05 mm
Seal Function & Motion
C-Seals will undergo plastic deformation when installed at the 20% recommendation.
In the seal selection process, you should always keep in mind basic design criteria. There is a direct relationship between seal outer diameter (OD) and the seal free height. Larger free heights provide better resilience and performance tends to be more consistent.
Industry Case Studies
Take a closer look at case studies that detail this metal seal's high performance.