航空

Prevent compressed air, gas or oil from escaping while blocking contaminants. Improve lifespan with self-lubricating, wear-resistant, and low-friction materials.

Provide consistent contact and sealing control in dynamic, high-deflection, or low-load conditions. Minimize leakages especially during critical flight phases like climbing and cruising.

Reduce leakage and fatigue in harsh environments. Improve engine efficiency and durability by reducing fuel consumption and CO₂ and NOx emissions. 

Meet stringent aerospace requirements using custom metal seals with specific geometries and materials. Prevent air ingestion and fuel leakage.

Resist jet fuel, oils, and high heat through gaskets. Handle dynamic applications for high deflection, low load, and high pressure/vacuum sealing: pumps, valves, and actuators.

Withstand high rotational shaft speeds, vibration and temperatures to seal oil within gearbox, essential for lubrication and cooling. Minimize friction and wear and prevent misalignment.

Ensure reliability in extreme heat (up to 1200°F/650°C) and pressure in high-stress areas: valves, ducts, and flexible joints. Resist performance issues from engine vibration.

Maintain integrity in extreme thermal and chemical environments. Lower maintenance costs, extend longer service life of components, and achieve weight reduction.

Minimize friction under extreme rotational speeds as well as axial and radial loads. Withstand high temperatures from adjacent turbine components.

Create gas-tight seal to keep lubricants inside while excluding contaminants. Provide high-speed, dynamic sealing to reduce wear, fatigue, and friction.

Ensure reliability of emergency power deployment by protecting structural integrity: reducing friction, withstanding extreme temperatures, and resisting chemical degradation.

Provide superior dielectric strength for insulation, withstanding extreme temperatures. Enable faster production rates, design flexibility and assembly, with 20-50% weight reduction.

Improve compressive strength and abrasion resistance in air inlet and compressors. Maintain dimensional stability under high temperatures and continuous load and vibration.

Safeguard electric components for rectification with thermoplastic housings and tubes: high strength-to-weight ratio and resistance to fuels and hydraulic oils.

Prevent electrical failure and voltage breakdown with polymer insulator material: exceptional dielectric strength, thermal stability, corrosion resistance, and high-impact durability.

Ensure cabin pressurization, temperature control, and thermal stability with custom geometries and lighter-weight assemblies. Prevent leakage of hydraulic fluids, air, or gases.

Handle high temperature and harsh chemicals, solvents, and moisture. Reduce risk of electrical short circuits in demanding, high-vibration, or vacuum environments.

Ensure effective sealing for static and dynamic (rotary/reciprocating) applications. Prevent high-pressure and abrasive contamination and handle misalignment and material wear.

Maintain sealing efficiency across wide temperature ranges. Shield internal components from contaminant ingress and heat development while maintaining low friction.

Handle wide temperature swings (deep cold to high heat). Resist chemicals in various fuels, including Sustainable Aviation Fuels (SAF). Reduce friction and wear with self-lubricating materials.

Eliminate leakage for consistent heat delivery and system reliability. Ensure hot air reaches critical areas: wing leading edges and engine inlets to stop ice formation. 

Protect engine components from Foreign Object Debris (FOD), dust, lightning, oils, and hydraulic fluids. Resist fatigue and chemical attack, reducing maintenance costs.

Contribute to weight reduction, vibration resistance, and fatigue durability. Reduce wear and friction for smoother operation and aerodynamic performance.

Protect against high-grade corrosion, contamination and water ingress in chemical processes. Handle high pressure and reduce wear for reliable flow control and energy consumption.

Maintain precise and controlled system pressure to support smooth operation. Control leakage to extend life of hydraulic pumps across low and high pressure environments.

Prevent fluid leaks, contamination and structural failure. Ensure proper deployment of landing gear system in extreme pressure and stress.

Ensure low leakage for extended performance, reducing replacements. Handle extreme conditions: high temperatures, speeds, and pressures, within dynamic rotor systems. 

Retain lubricant and exclude contaminants, critical for airworthiness and safety. Provide dynamic and static sealing with low leakage, low friction, and the handling of shaft eccentricity.

Increase part lifetime and improve maintenance cycles with temperature and pressure resistance. Control leakage rate with metal seal's high spring-back capability.

Provide dynamic sealing between seal and rotating shaft with lifetime confidence up to 5,000 hours under rotational speeds up to 6,000 hours.

Ensure weight optimization, low wear, and long lifetime. Handle high axial and radial loads with tighter operating clearances, improving compressor performance.

Protect systems under extreme high temperature with sealing, wear and friction components designed to restrict hot air flow.

Provide low leakage and fatigue durability at all pressures and temperatures, despite vibration and dilatation.

Enable leak tightness, fatigue durability and extreme temperature resistance in high-load applications: internal combustion engines, turbochargers, and aerospace propulsion.

Enhance thermal stability and provide effective lubrication over a wide temperature range. Ensure superior lifetime expectancy compared to elastomer seals, reducing wear and friction.

Achieve weight savings and higher power density. Reduce noise and vibration while being compatible with aerospace fluids and various lubricating oils for sealing control.

Prevent high temperature leaks, ensuring system integrity for cabin pressurization, anti-icing, and safety. Provide fatigue durability, friction reduction and sealing control.

Reduce costs and boost fuel efficiency through high strength-to-weight ratios. Provide superior thermal stability, even in harsh aerospace environments.

Provide tight sealing under high temperature and pressure, while resisting thermal aging. Ensure lighter weight, which is suitable for compact, weight-sensitive designs.

Provide dynamic and static sealing, high temperature resistance and electrical insulation, while maintaining weight requirements.

Deliver insulating properties within electrical systems, handling load and creep resistance under temperature, and vibration resistance.

Resist mechanical loads, and provide vibration resistance in high temperature environments.

Withstand cryogenic temperatures for H₂ using metal and polymer seals and wear and friction control solutions.

Handle high axial loads, delivering extended lifetime and low wear and friction to protect compressor systems at high temperatures.

Limit friction and wear while ensuring strong, tight sealing, using engineered innovative polymer designs.

Provide dimensional stability at high temperatures and deliver excellent performance over time in feedlines and pipes.

Provide reliable low friction and wear control under cryogenic conditions. Handle chemical resistance and compatibility in fuel immersion when required.

Take care of vibration resistance while providing long lifetime requirements.

Prevent leakage and enable electric insulation, weight reduction, and vibration resistance, under high temperature environments.

Enable electric insulation, low wear, load & creep resistance & weight optimization, all while under high temperatures.

Combine different components to simplify systems, reduce weight and ensure better integration.

Manage sealing, wear and friction control with materials and solutions compatible with any aerospace fluid, sand, dirt, and de-icing agents.

Low friction and long wear life sealing solutions that are compatible with aerospace fluids and fuels.

Weight saving components and systems to ensure sealing and electrical insulation in power generators.

Electric insulation, high temperature resistance and vibration resistance from sealing, wear and friction components built to last.

In temperatures up to 276°C (529°F), customers need a solution that can resist mechanical loads which still insulating components.

Gimbal seals and attack sensor seals require stable friction and compatibility with air, dust, moisture, and de-icing solutions.

Low friction, and long wear life sealing solutions designed to enable rotational speeds and resist high creep.

Long life solutions, high surface speed solutions and near-zero leak rate components.

Systems that can withstand bleed air temperatures and heat transfer while maintaining fatigue durability and friction reduction.

High mechanical strength and low friction components designed to handle aerospace hydraulic fluids and high temperatures as required.