Standard Specifications
Is this Component PFAS-Free*?
Depending on the application and equipment specifications, we may be able to manufacture this solution PFAS-Free*.
Contact our engineers to learn more and start the discussion on how we can support you to meet the requirements of your application.
* PFAS-Free here means we do not intentionally add PFAS material in the product, but does not exclude the possibility of traces, as these materials are common in the environment.
Seal Function & Motion
Static & Dynamic Applications
There are two basic types of sealing applications: static and dynamic, in which at least two hardware surfaces come in contact with one another.
In static applications, there is essentially no relative motion between the hardware surfaces. A typical example may be flanges that are bolted together. Omniseal Solutions offers mostly face seals in such applications.
In dynamic applications, at least one surface is in motion relative to the other. A typical example is a hydraulic cylinder with shaft and bore. Further, there are two directions of motion in dynamic applications: reciprocating or linear motion, and rotary (including oscillating) motion. We offer mostly radial seals (rod seals and piston seals) in such applications.
Occasionally, the application may be a combination of both static and dynamic. For these more complex cases, you can contact our team of experts.
Radial & Axial (Face) Sealing
Based on the hardware configuration and location of seal glands, sealing can be either radial or axial (face sealing). Radial sealing has glands that compress seals in a radial direction. Male glands are machined in the shaft, whereas female glands are machined in the bore. Radial sealing is usually, but not always, dynamic.
We also offer rod seals and piston seals for these applications. Axial sealing has glands that compress seals parallel to the axis of the seal. Glands are machined on the face of the hardware. Axial sealing is usually, but not always, static. Omniseal Solutions offers inside and outside face seals in such applications.
Omniseal® Spring-Energized Seal Installation
Industry Case Studies
Take a closer look at case studies that detail this spring-energized seal's high performance.
Jet Engine Lubrication Systems
As manufacturers continue to improve the efficiency of jet engines, this results in the increase of temperatures throughout these systems. One example is High Temperature Stability (HTS) lubrication oils that are conveyed through a complex circuit and subjected to large temperature variations as well as strong vibration. These oils have been developed to sustain the harshest conditions in order to cool down engine parts and lubricate bearings.
Launch Vehicle Fuel / Oxidizer Poppet Valve
In order to handle all the fluids used on a launch vehicle such as in the propulsion system, many different type of valves are installed that also require radial and dynamic seals. Some are poppet valves, which are unique due to the reciprocating movement of the shaft leaving the seal unsupported. As a flow control device, the valve allows the flow of pressurized fluid (liquid or gas) in one direction only.
In Vitro Diagnostic (IVD) Plunger Pump
The heart of global life science laboratory industry may well be in vitro diagnostics (IVD) equipment, which is used in the diagnosis of infectious and chronic diseases as well as preventative care and drug therapy monitoring. This equipment tests biological specimens such as blood, cells, urine, saliva and tissue. As point-of-care medical devices, IVDs must be safe, reliable and appropriately validated to uncover critical results that directly influence patient care.
Co-development & Customer Intimacy
Tailor-made solutions through careful and detailed collaboration with customers.
Tailor-made solutions through careful and detailed collaboration with customers.
Material Expertise & Development
A solution's performance is often reliant on the characteristics of the base material used.
A solution's performance is often reliant on the characteristics of the base material used.
Precision Processing & Manufacturing
Omniseal Solutions has been precision manufacturing since the 1950's.
Omniseal Solutions has been precision manufacturing since the 1950's.