Temperature: -268°C to +288°C
Max Load (dry): 5.5 MPa
Max Speed: 2 m/s
Friction coefficient: 0.12 - 0.20
Max PV (dry/lub): 0.26 MPa m/s
Rods and Tubes: (ϕ) 1.2m x (L) 3m
Sheets: (L,W) 610 mm x (ϕ) 80mm
Tapes: (W) 1m x (T) = [0.08;6] mm
- Superior dry friction
- Stick/slip elimination
- Hardware abrasion reduction
- Minimal moisture absorption
- Dimensional stability in all chemicals
In addition to the more tailor-made solutions offerings, for example the Omniseal Solutions™ piston rings, typical offerings of Rulon® J include automatically molded bearings and components, skived sheets, sleeve, flanged and thrust bearings, stamped and formed seals, extruded shapes, machined parts, molded shapes.
Applications include printers, copiers, air compressors, appliances, insulators, linear slides, anemometers, wear bands, solenoid valves and refrigeration valves.
Market & Case Studies
The wear and friction control material is ideal for high-speed, low-load applications as it has one of the lowest coefficients of friction among commercially available blended PTFE materials.